If you witness your Brother Printer not printing, then all-important printing tasks may remain uncompleted. Various printing issues are being faced by users using Brother printers. Here in this detailed guide, we will discuss every printing error being faced by Brother printers. This will help you to fix printing issues of your own without the need of taking a printer anywhere.
Common Printing Errors of Brother Printers
• Unable to Print on both the sides
• Brother Printer not printing even after being connected to Wi-Fi
• Wireless Brother Printer not Printing Black
• Brother Printer is unable to connect to Wi-Fi
• Unable to establish a connection to Mac wireless
• Unable to connect to Windows PC
• Not recognizing New Toner Cartridge
Possible reasons for Brother Printer facing Printing Issues
• The unsuccessful connection between your printing device and computer.
• The unappropriated Brother Printer driver installed on your computer
• New Toner Cartridges remain unrecognized
• External antivirus security software programs or firewalls are stopping printers to accept a print command.
• Offline status of Brother Printer
Error 1
Wireless Brother Printer not Printing Black
If your in our that your Brother printer is not printing Black, consider checking the following things as suggested:
• Check the connections carefully and ensure that the Printer is switched on.
• Monitor Black Ink Cartridges and make sure that ink is not dry.
if both of the above-mentioned points are clear, then reset the ink cartridge and configure the network from the beginning.

Reset Ink Cartridges
• Switch on Your Brother Printer.
• Open the toner door of the printer carefully.
• For a few seconds, press the “Back” or “Clear” button on the printer screen.
• The ‘Reset menu’ will represent ‘Arrow Keys’ to browse the options.
• Select ‘Brother Printer’s toner cartridge’ and choose the ‘reset’ option.
• Now, look for the Toner that you wish to reset. Select the Black Ink Cartridge and Press ‘OK’.
• To confirm press ‘1’ and afterward ‘Clear’ or ‘Back’ button to reset the black ink cartridge.
• Come out from a window and try printing a test page.
Configure the network for Brother Printer
• Disconnect the Brother printer from the power supply and turn it on after a few seconds.
• Uplift the printer’s cover and move towards the printer screen.
• Press the “Cancel” and “Print” buttons at the same time and then press the ‘+’ button.
• From the list of ink cartridges, choose the ‘Black Ink Cartridge’ to reset.
• Press ‘OK’ to confirm your choice.
Above mentioned steps will help your Brother Printer Black Ink Cartridge reset successfully.

Error 2
Brother Printer is unable to connect to Wi-Fi
Are you struggling to connect your Brother Printer to Wi-Fi? Here are the steps explained below to assist you in establishing a successful connection between your Brother Printer and your wireless network.
• Turn on your Brother Printer and ensure that it should be placed near your wireless router.
• Press and hold the ‘WLAN’ or ‘AOSSTM’ button for a few seconds.
• Press the‘Installation’ button for two seconds located at the back of your Brother Printer as it will start searching for a wireless network automatically.
• Observe Toner LED light blinking for two or more minutes and choose your wireless network from the list available.
• Enter the password and connect them. Once the successful connection is set up Toner and Drum Light will blink together.
• After a couple of minutes, you will notice “Connected’ displayed on Brother Printer Screen.
After applying the above-mentioned steps, your printing machine will connect to your wireless network.

Error 3
Unable to establish a connection to Mac wireless
Configurations of wrong settings and Fault Printer drivers might be the reason behind Brother Printer not connecting to Mac wireless device.
Check that you should have installed the latest and updated Brother Printer Driver on your Mac computer. if you have an appropriate printer driver installed, then, follow mentioned steps to connect your Mac device with the Brother printer.
• Open Apple menu options on your Mac device.
• Choose ‘System Preferences’ to launch it.
• Now click on the ‘Printer and Scanner’ option.
• Hold the ‘Control’ key on your keyboard for a few seconds and at the same time press the ‘Reset Printer’ option on your Brother Printer.
• Press the‘-‘ icon to erase your printer from the ‘Printer and Scanner’ list.
• To add a brother printer, click on the ‘+’ icon.
• From all available printers, select the ‘Brother Printer’.
• Select the ‘Brother printer’ from the ‘Default Printer’ list as well and hit the ‘Add Printer or Scanner’ button to complete the setup.
After this, the Brother printer will successfully connect to your Mac device. You can try printing a test page to check if your printer is responding to your device.