Hose Fittings Suppliers introduces the connection method of hydraulic hose:

1. The inner and outer threads of the quick connector can be connected with the hose only after using the transition joint or the adapter.

2. No matter there are many kinds of hose joints, it is necessary to choose how to use transition joints according to the type of hose joints. If the hose is an ordinary water pipe, it should use a transition joint, one end of the inner tooth, one end of the water pipe, and then fixed with a throat hoop. If the two ends of the hose are internal teeth, it should be used with the transition joint, one internal tooth and one external tooth. If the two ends of the hose are external teeth, it should be connected with the transition joint, and the internal teeth will be straight.

3. Generally, hydraulic quick-change joints need to withstand high pressure. Therefore, in most cases, high-pressure oil pipes are used. In most cases, both ends of the oil pipes are internal teeth, so they should be able to be connected directly.

4. As for the hydraulic joint, there is no need for other rubber rings to seal, and the product itself is concave at one end and convex at the other end, which can be completely sealed after connection.

Through the above introduction, Hydraulic Adapters Wholesaler hopes that you can simply refer to the content of this article in future use.
https://www.cnshunda.com/