As global industries and municipalities face increasing demands for effective and sustainable water treatment solutions, GO2TM chlorine dioxide is emerging as a leading alternative to traditional chlorine treatments. Manufactured by top Chlorine Dioxide Manufacturers, GO2TM has proven highly effective in wastewater treatment, offering superior disinfection and oxidation capabilities while maintaining environmental safety.

Chlorine Dioxide for Water Treatment: A Game Changer

GO2TM chlorine dioxide is not just another chemical; it’s a breakthrough in wastewater treatment technology. Unlike traditional chlorine, which can struggle with efficiency at varying pH levels, GO2TM retains its biocidal activity across a broad pH range without significantly hydrolyzing in water. This distinct chemical advantage means GO2TM delivers more reliable results, ensuring that wastewater systems maintain their compliance and efficiency, no matter the water conditions.

When used for chlorine dioxide for water treatment, GO2TM offers a range of applications including odor control, phenol destruction, and sulfide oxidation. For most municipal wastewater systems, a residual concentration of up to 5 ppm of GO2TM chlorine dioxide is typically sufficient to achieve effective disinfection. For odor control, particularly for sulfides, GO2TM oxidizes these compounds without forming problematic colloidal sulfur, making it an ideal choice for industries seeking cleaner, more effective water treatment.

Precision in Dosage for Optimal Performance

One of the critical advantages of GO2TM chlorine dioxide is its precise dosing requirements, which vary depending on the degree of contamination and water conditions. For example, to control sulfide odors at pH levels between 5 and 9, a minimum of 5.2 ppm of GO2TM is required to oxidize 1 ppm of sulfide ion. In the case of phenol destruction, dosages differ based on pH levels, with 1.5 ppm required at pH levels below 8, and 3.3 ppm at pH levels above 10. This tailored approach to dosage ensures that GO2TM chlorine dioxide offers the most effective treatment, reducing waste and optimizing treatment efficiency.

Enhanced Odor Control Capabilities

GO2TM chlorine dioxide stands out for its ability to neutralize odors without the formation of harmful byproducts. The compound is non-reactive with ammonia and most nitrogen-containing compounds, which allows it to operate at lower dose levels than chlorine while still being highly effective. Whether used to oxidize sulfides, phenols, simple cyanides, or even iron and manganese compounds, GO2TM ensures a cleaner, fresher outcome.

Method of Dosing: Simple, Safe, and Efficient

The dosing of GO2TM chlorine dioxide is straightforward. By combining the two components of GO2TM with water, a 3% chlorine dioxide solution is produced. The chemical solution should be fed directly into the system at a point that ensures proper mixing and uniform distribution. It’s crucial to prevent volatilization of GO2TM by placing the feed point below the water level and avoiding coincident feeding with lime or powdered activated carbon.

Reliable Testing and Analysis

To ensure the highest quality standards, residual GO2TM chlorine dioxide concentrations should be analyzed using substantiated methods, such as the DPD-Glycine Method and Amperometric Method II, both published in the Standard Methods for the Examination of Water and Wastewater. These methods ensure that chlorine dioxide concentrations are accurately monitored and verified throughout the treatment process.
For more information about GO2TM chlorine dioxide and its applications in water and wastewater treatment, visit GO2 International.

Contact Information:
GO2 International
6700 Caballero Blvd, Buena Park, CA 90620, USA
Tel: (714)736-9811
Website: www.go2intl.com