Mini Trigger Sprayer Company introduced that the lotion pump head is also called a pressure lotion pump, which uses the principle of atmospheric balance to pump out the material liquid in the bottle and supplement the external atmosphere to the liquid dispenser in the bottle. The main performance indicators of the emulsion pump head: pneumatic times, pump output, down pressure, pressure bucket opening torque, rebound speed, water inlet indicators, etc. The dispenser is divided into two types: sanitary ware and screws, and functionally divided into spray, foundation cream, lotion pump, gas atomization valve, and vacuum bottle.

Its size depends on the caliber of the bottle body. The spray specification is 12.5mm-24mm, and the outflow is 0.1ml/back-0.2ml/circuit. It is generally used for packaging perfumes, gel water, and other products. The length of the parameters with the same caliber can be based on The height of the bottle is determined. The specification range is 16ml~38ml, and the oil output is 0.28ml/time-3.1ml/circuit, mainly used for cream and washing products.

Special dispensers such as lotion pump heads and hand buckle sprinklers. The foam pump head is a non-irrigation manual pressure pump head. It does not need to inject air to generate foam. Just a light press will produce quantitative and high-quality foam. Usually comes with a special bottle. Hand button nozzles are usually used for detergents and other products. The composition of the dispenser is more complicated, usually including dust cover, magnetic head, lever, gasket, piston, spring, valve, bottle cap, pump body, straw, valve ball (including steel ball, glass ball). Bottle caps and dust jackets can be made of colored, electroplated, and electrified aluminum rings. Airless bottles are usually cylindrical, specifications 15ml-50ml, each 100ml, the total volume is small, according to the principle of atmospheric pressure, cosmetics are used to prevent pollution during use. Airless bottles have anodized aluminum, plastic plating, and colored plastics, and the price is more common than other ordinary ones. The container is expensive, and the general order quantity is not high. Distributor customers seldom open molds by themselves and produce many molds they want, which is very expensive.

Through the above introduction, Fine Mist Sprayer Pump Manufacturers hope that you can simply refer to the content of this article for future use.

https://www.jiemingspray.com