Mini Trigger Sprayer Company Introduces Outer Packaging Selection Requirements


Posted April 9, 2022 by kerrywang

Mini Trigger Sprayer Company Introduces Outer Packaging Selection Requirements
 
Mini Trigger Sprayer Company Introduces Outer Packaging Selection Requirements

1 box
The surface of the box should be smooth and correct, and there should be no obvious scratches, burrs (burrs), serious collapse and damage. The opening tightness of the box should be appropriate. When taking the flower box, do not use your fingers to forcibly peel it off to hold the edge of the cover, and it is qualified if the bottom does not fall off. The mirror surface in the box, the contents and the box should be firmly attached, the mirror surface should have a good image, and there should be no scratches and damages on the bottom.

2. Printing and labeling.
The pattern and handwriting printed on cosmetic packaging should be neat, clear, not easy to fall off, and uniform in color. The labels of cosmetic packaging should not be wrongly posted, missed or reversed, and should be firmly pasted. Label requirements are in accordance with the provisions of GB 5296.3 (guī dìng).

3, flower box.
The flower box should be tightly matched with the middle box packaging. The flower box should be clean, straight and flat, with the lid well covered, without wrinkles, missing edges and corners. The adhesive parts of the flower box should be firmly pasted, and there should be no sticking marks, cracking and mutual adhesion. There is no wrong installation, missing installation or flipping phenomenon of the product.

4. Middle box
The middle box should be tightly matched with the flower box packaging. The middle box should be clean, straight and flat, and the box cover should be closed. The adhesive parts of the middle box should be firmly pasted, and there should be no sticking marks, cracks and mutual adhesion. There is no wrong installation, missing installation or flipping phenomenon of the product. The middle box label should be correct, clean and complete, and should indicate the product name, specifications, the number of boxes and the name of the producer as needed.


Through the above introduction, Lotion Dispenser Pump Factory hopes that you can simply refer to the content of this article in future use.


https://www.kerrysprayer.com/
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By kerrywang
Country China
Categories Accounting , Affiliate Program , Architecture
Tags mini trigger sprayer
Last Updated April 9, 2022