The Open Type Rotary Screen Printer （ https://www.hotairstenter.com/product/ ） has high accuracy in use. It is composed of multiple link units composed of a combination of links used during operation, and the driving link has one end of the upper and lower flanges of the pin hole chain, and is arranged on the deep groove ball bearing and the upper and lower On both sides, the upper and lower dust caps are arranged between the chain links, and the outer surfaces of the top and bottom rings are provided with cylindrical protrusions, and the cylindrical boss of the upper dust cap is provided with holes for oblique lubrication, The end lubrication hole corresponds to the deep groove ball bearing.

Hot Air Stenter's high wear adjustment chain is mainly composed of multiple units connected by combination keys, and any link units are parallel and spaced apart from each other, and the upper flange and the lower flange are cavity coupling chains. And the two ends of the upper and lower flanges are respectively provided with holes for chain pins. The chain contains oil-free bearings and the holes are arranged concentrically. The free oil of the sleeve bearing is enveloped on the axis of the pin, and the upper end of the pin’s shaft A card slot is provided, a threaded hole is provided in the center of the upper flange, and a pressure plate is arranged.

The center of the pressure plate of Hot Air Stenter has a through hole to the corresponding thread of the hole, the bolt is inserted into the through hole, the bolt is screwed into the threaded hole and the edge of the pressure plate is embedded in the card slot, due to the multiple track sections of the Hot Air Stenter Each rail part includes the top plate of the rail and the lower plate of the rail. A part of the bottom rail is provided with a lower plate and a lower plate. The lower plate and the upper plate of the rail are arranged in parallel, and the friction plate is arranged inside and under the baffle. The track plates of the plates are opposite, there are chain links in the chain, and the chain links in the chain are fixedly connected to the slave sensor.

Adjustable cooling fan for Hot Air Stenter, with upper air outlet, set in the lower air outlet of the casing, and on the opposite side of the bottom air inlet, the electric motor is installed at the same horizontal position on the opposite side of the air inlet, the output shaft It extends into the housing to install the blades, and the air volume adjustment device, the air volume of the adjustment device, includes a fixed plate sliding plate and a transmission mechanism.

The adjustment of the center of the Hot Air Stenter （ https://www.hotairstenter.com/product/hot-air-stenter.html ）, the two sides of the fabric are placed in the center, the feed port of the machine guides the configuration of the fabric at the outlet, because the discharge port of the upper belt guide machine is against the cloth roll, the guide belt Hot Air Stenter feeds the fabric The exit is facing the machine, the driving belt of the Hot Air Stenter is facing the roll, the driving belt is embedded in the upper fabric, and the lower Hot Air Stenter driving belt interweaves the fabric as a guide belt and Hot Air Stenter guide belt.