Hot Air Stenter ( https://www.hotairstenter.com/product/hot-air-stenter.html ) is divided into three parts
1. Loading table. The loading table is to stack the aluminum plates to be printed on the loading table. During the equipment printing, the loading table automatically raises the remaining material on the loading table to the suction cup according to the control of the electric eye, so that the suction cup can absorb the aluminum plate, and then send it to the conveyor. Dust section.
2. Sticky dust section. The sticky section is to stick the dust and dirt on the surface of the aluminum plate to the surface of the roller, so that the aluminum plate that enters the screen printing is clean and tidy. Improve the yield rate.
3. Screen printing section. After the aluminum plate enters the Hot Air Stenter table, the centering device in the Hot Air Stenter machine table automatically returns the aluminum plate to the initial alignment. Hot Air Stenter is automatically printed. After the printing of the Flat Screen Printer Factory ( https://www.hotairstenter.com/product/flat-screen-printing-machine.html ) is completed, the screen of the screen printer is lifted, and then the Hot Air Stenter table transfers the printed aluminum plate out of the Hot Air Stenter and enters the drying equipment for drying.