Precautions for Stenter ( https://www.hotairstenter.com/product/hot-air-stenter.html) chain

Do not directly soak the chain in strong acid and strong alkaline cleaning agents such as diesel, gasoline, kerosene, WD-40, degreaser, because the inner ring bearing of the chain is filled with high-viscosity oil, once it is washed off Afterwards, it will make the inner ring dry, no matter how much low-viscosity chain oil is added afterwards, it will not help.

Suggested cleaning method

Hot soapy water, hand sanitizer, or a discarded toothbrush or a slightly harder brush, can be washed directly with water. The cleaning effect is not very good, and it needs to be wiped dry after cleaning, otherwise it will rust.

Special chain cleaners are generally imported products with good cleaning effect and good lubrication effect. They are sold in professional car shops, but the price is more expensive. Taobao also sells them. Bikers with better economic foundations can consider them.

For metal powder, find a larger container, take a spoonful and rinse with boiling water, remove the chain and put it in the water to clean it with a harder brush.

Advantages: It can easily clean the oil on the chain, and generally does not clean the butter in the inner ring, it is not irritating, and does not hurt your hands. This thing is commonly used by masters who do mechanical work to wash their hands. . You can buy them in larger hardware stores.

Disadvantages: Since the auxiliary is water, it takes a long time to wipe or dry the chain after cleaning.

Washing the chain with metal powder is my usual cleaning method. I personally feel that the effect is better. I recommend it to all riders. If any rider has objections to this cleaning method, I can give advice. Bikers who need to remove the chain frequently for cleaning are advised to install a magic buckle, which saves time and effort.

Lubrication of the chain

After each cleaning, wiping or cleaning the chain with solvent, add lubricating oil, and make sure that the chain is dry before adding lubricating oil. First, penetrate the lubricating oil into the bearing part of the chain, and then let it become viscous or dry. This can surely lubricate the parts of the chain that are easy to wear (the two joints on both sides). A good lubricating oil feels like water at first and is easy to penetrate, but after a while it will become thicker or dry, and can play a lubricating effect.

After applying lubricating oil to the chain of Flat Screen Printer ( https://www.hotairstenter.com/product/flat-screen-printing-machine.html ), use a dry cloth to wipe the excess oil on the chain to avoid adhesion of dirt and dust. Before reinstalling the chain, remember to clean the interconnection of the chain to ensure that there is no dirt left. After the chain is cleaned, some lubricating oil must be applied to the inside and outside of the shaft when assembling the magic button.