In a colorful world, everything is colorful. Printing is a procmachess that displays and remembers colorfulness. Screen printing is a product that allows you to print better products with less investment and longer storage time. Good way, of course, so you need a cost-effective screen printing machine to help you. If you are printing a wide variety of products with different specifications, then you can come to Licheng Flat Screen Printer Factory （ https://www.hotairstenter.com/product/flat-screen-printing-machine.html ） to see and consult. What size and budget do you need? We can customize it for you according to your needs. And to meet your requirements to the greatest extent!

Open-type rotary screen printing machine customization and maintenance

Although the open rotary screen printing machine is good, it needs your careful maintenance.

1. Maintenance method of open rotary screen printing machine and working environment:

Licheng Flat Screen Printing Machine Factory specializes in the production of screen printing machines. Of course, we understand open-type rotary screen printing machines. We also do product maintenance:

1. The printing studio environment should be clean, especially the printing glass, must be wiped clean before work, and the developing machine should be cleaned and maintained regularly;

2. The inspection of voltage and power grid should ensure that it is within the voltage used to avoid excessive voltage or low voltage;

3. The storage area of ​​the PS version should be set in an air-conditioned dark room or a place with low temperature and dry as much as possible, especially avoiding the water tank;

4. Do not bend it when using the PS version. Do not touch the plate surface with the hands stained with oil or developer.　

Second, the maintenance and maintenance of the air compressor components of the Open Type Rotary Screen Printing Machine（ https://www.hotairstenter.com/product/ ）:

The air compressor component of the folio rotary screen printing machine can not allow too much water and oil to enter the air pressure system, to avoid cylinder failure and shorten the service life of the cylinder, to ensure that the compressed air is dry and clean, it is best to add it if possible Install a freeze dryer; check whether the oil amount in the oil cup in the converter is enough every day, the relief valve is not used for a long time, it should be pushed to the rear end; when the work is stopped, the main power switch and compressed air source should be turned off; speed control cylinder And the axis of each part should avoid magnetic loss; the horizontal slide seat part of the workbench and the precision highly coordinated components must be wiped clean and oiled frequently to prevent the precision from being affected by rust.