Treatment Of Exhaust Gas From Hot Air Stenter


Posted June 10, 2020 by printingmachinelicheng

In order to reduce the warp shrinkage rate of the fabric during the operation of the hot-air tenter, the stability of its fabric size will be reduced. Situation.
 
In order to reduce the warp shrinkage rate of the fabric during the operation of the hot-air tenter, the stability of its fabric size will be reduced. Situation.

The Hot Air Stenter ( https://www.hotairstenter.com/product/hot-air-stenter.html ) adopts the water spray treatment method for the treatment of exhaust gas components in the early stage, but the effect is not very good when it is used, and it does not meet the standard emission conditions. Most of the equipment is now used for operation Static dust collection equipment.

Open Type Rotary Screen Printer ( https://www.hotairstenter.com/product/ ) adopts electrostatic dust collection equipment. The main principle is that static electricity occurs when high voltage causes static dust to be adsorbed on the anode, and then plays a role in purification. Such a long-term accumulation will cause Yin and Yang The pole spacing becomes smaller.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By licheng
Business Address Zhejiang Province, Shaoxing City Shengzhou City Jinting Industrial Zone
Country China
Categories Business
Last Updated June 10, 2020