There’s nothing more comforting than settling down on the couch in front of a fireplace with a big blanket and a good book. The fireplace, for most people, is practically synonymous with warmth and comfort. It’s a place where people gather.

But just like many other things in the home, the fireplace can also end up deteriorating, especially if you don’t do your part in maintaining it. The following are just some of the important steps that you need to do if you want to take care of your fireplace in North Vancouver:

1. Regularly clean and sweep your fireplace in North Vancouver.

Over time, soot, dust, debris, and ash collects in the fireplace and the chimney. Not only will this affect the efficiency of your fireplace but it will also cause poor indoor air quality. It’s a big fire hazard as well. Scheduling routine sweeping of the chimney and removing the soot and debris in the fireplace can go a long way in ensuring those things will not happen. With companies like ProGas North Shore, you can deal with the creosote buildup in your chimney and fireplace in North Vancouver without a lot of issues.

2. Do a visual inspection.

It’s actually helpful to visually inspect your fireplace for signs of damage that can be caused by old age. As you use your fireplace, it deteriorates and starts showing signs of damage like cracks and loose bricks. You might also notice some damage on the mortar. The chimney structure might be compromised as well, which can be obvious with tell-tale moisture and rusting. If you see any of these signs, it’s time to have your fireplace in North Vancouver inspected by a professional.

3. Check the chimney cap and the spark arrestor as well.

Did you know that these two parts play a major role when it comes to keeping your chimney in good condition? That is because they prevent things from getting in the chimney. The chimney cap blocks animals and debris. It should always be in place. Check the spark arrestor as well if it has corroded and would need to be replaced.

4. Make sure you are using the right fuel.

Using the wrong fuel for your fireplace will surely shorten its life. For wood fireplaces, make sure you only use seasoned hardwoods such as birch and oak. Maple can also be a good substitute. They are recommended because they don’t produce as much creosote as the other types of wood.

Make sure you also update your smoke and carbon monoxide detectors. They could be failing or might not be up to standards. Schedule annual fireplace maintenance as well and find experienced fireplace technicians who will help ensure the safety and performance of your heating unit.

Corey Peters is the author of this article. To know more about Water heater North Vancouver please visit our website: progas.ca