Professional cornhole players are enthusiastic, have played the cornhole game for quite some time, and are very conversant with the game's rules and regulations. In most cases, they have played several games and either won or lost. So, they are looking for the best cornhole board for one of their games. So, what choices must they make to have the best cornhole board? Here are some considerations a professional cornhole needs to make before buying the best professional cornhole boards.

Considerations Before Buying a Cornhole Board For Tournaments

1. Material: In a tournament having top-quality tools will boost an individual to win. The same can be said when it comes to playing cornhole games. The type of material used to construct the boards, their stability, and the finishes applied can significantly impact how the results of the cornhole game when played. The only material that the ACA approves for Cornhole boards is plywood. Therefore, if you're a professional and want to play in a specific league, you'll need to purchase professional cornhole boards made of plywood material as it minimizes and reduces the bounce on the bag when tossing it, improving throw accuracy. And if you want the best, you will need to go for one made of Baltic birch wood because it is among the strongest wood, resistant to weather, and has 11-13 core layers glued together in alternating directions to prevent warping over time. Thus, providing a heavy, high-quality board with minimum bouncing ability during gameplay.

2. Surface: The texture of the board surface is also crucial; it needs to be smooth and carefully sanded. Finishing should be done through UV Graphic Printing to achieve a smooth surface. This printing incorporates ultraviolet light to cure ink as it is printed, resulting in a vibrant, high-quality, weather-resistant, and fade-resistant finish that is sealed for long-term use. If the finishing surface is not smooth, the bean bags could slip and bounce on the surface, negatively impacting the game’s final results.

3. Design: Choosing the perfect appearance for your professional cornhole boards will give you some credit as a professional. Having a whiteboard will improve the feasibility of both the audience and the judges and, thus, provide a humble time for you when playing. On the contrary, if you want to put some personality into the board, say, a logo, initials, or team names, use latex-based high gloss paint, but be careful not to cause excessive sliding.

As a professional, you should also be aware of the other specs of regulations cornhole boards have. For instance, boards must measure two feet wide and four feet long, with a tolerance of ±1/4 inch. The hole must be 6 inches (±1/8 inch) in diameter, centered width-wise. The center of the hole must be 9 inches (±1/8 inch) from the back edge of the board. Boards must have a minimum top layer thickness of ½ inch with cross-section support or ¾ inch without cross-section support. Boards must weigh at least 15 pounds. The front edge of the board should be raised between 2.5 and 3.5 inches above the ground. The top of the board should rest 12 inches above the ground (±1/2 inch). These will enable you to buy a board within the required limits.