DuraGrade Concrete offers excellent adhesive properties to concrete surfaces. It has high level of resilience against any scratch, chip, chemical, and UV radiation. Another noteworthy feature about DuraGrade Concrete is that it does not require any primer, basecoat, or topcoat.

Let’s see our expert’s opinion about our DuraGrade Concrete product:
“Our DuraGrade products not only provide a lower VOC option for those concerned with the preservation of our environment, or are required to comply with stricter VOC regulations, they provide outstanding protection with best in the industry performance! DuraGrade Concrete exceeded the capacity of the ASTM testing apparatus/limits in three of the five tests. In addition, during the pull-off adhesion bond strength test, the concrete broke apart and DuraGrade never lost adhesion. This is unheard of in our industry,” said David Ciglar, General Manager, Rust Bullet, LLC.
"We used DuraGrade Concrete to seal our warehouse floor and mezzanine. The product was easy to apply, and adhesion appears unbreakable. We couldn't be happier," said John Dunlap, CEO, CashMyGuns.com.
How to apply DuraGrade Concrete on surfaces?
You can apply DuraGrade Concrete with a brush, roller, or any spray equipment. It is best used for indoor and outdoor surfaces, and it acts as a shield from hot tire pickup. Visit our website for more information.
Why I should consider buying Rust Bullet DuraGrade Concrete?
By applying DuraGrade Concrete on old surfaces and floors, it gives a premium look. Applying a minimum of two thin coats to an older floor or a floor that is lacking in lustre can bring any indoor or outdoor floor back to life. You can go one step-further and broadcast Rust Bullet® Color Flakes after applying DuraGrade Concrete to give it a classy look. Also, if you desire to get a smooth, shiny, sleek topcoat you can use DuraGrade Clear which has maximum aesthetic value.
Additionally, DuraGrade Concrete has a patent-pending, low VOC formula (49 g/l - 170 g/l), thereby offering VOC compliance in all 50 states, and which is present in 18 standard colors, or you can select your custom color option.
Rust Bullet, LLC reports the following impressive ASTM test results:
• Taber Abrasion (ASTM D4060): 38 mg / 1,000 Cycles
• Impact Resistance (ASTM D2794): >40 inches (exceeds max test limits)
• Mandrel Bend (ASTM D 522-13): >32% without cracking (exceeds test) Pull-off
• Adhesion Bond Strength (ASTM D7234-05):
• 50mm dolly: >525 PSI (Dollies unable to be removed at ~525 max psi)
• 20mm dolly: >1485 PSI (the concrete broke apart before DuraGrade lost adhesion)
Visit the Rust Bullet Homepage to browse your best Rust Inhibitor and order now. Additionally, users can follow our Facebook page.

About the Company:
Rust Bullet, LLC is a coatings manufacturer headquartered in Reno, NV USA, specializing in protective, rust inhibitive, and corrosion control coatings. Rust Bullet, LLC sells to businesses and consumers around the world through our global distribution network.
For more information, contact Rust Bullet, LLC at 1-800-245-1600 or via email at [email protected]. DuraGrade Concrete is currently available in quart, gallon, and 5-gallon unit sizes. Purchase DuraGrade Concrete products on Rust Bullet, LLC's websitehttps://www.rustbullet.com/concrete-applications/or on Amazon, Walmart, and Lowe's.