Cabinet refacing Poway has been one of the most lucrative businesses for people looking to improve their homes. More and more homeowners have been using special companies in order to get the best results. The process is not expensive, simple and fast, and doesn’t require making a mess, like with major remodeling projects. But as with any industry there are still some questions that need answering about kitchen cabinet refacing San Diego.

How Long Does a Kitchen Cabinet Refacing San Diego Last?

One of the most frequently asked questions about anything is how long will it last. There is no straight forward answer to this question. It all depends on a series of factors and conditions. For instance, https://thestylishcabinet.com/ kitchen cabinet refacing San Diego requires that the surfaces of the kitchen cabinets be covered with some form of veneer. Also, if necessary, the structure of the cabinet box itself has to be strengthened in order to better support weight.

The process is pretty simple and doesn’t require making a mess around the room. But after the job is done, the cabinets have to go back to their normal routine, facing kitchen conditions such as potential water damage, oil and grease spills, heat and other such things.

The amount of time the kitchen cabinet refacing San Diego job lasts is directly linked to how well it was done in the first place. Everything from the quality of the materials used to the skill of the person putting on the veneers has its role in determining the life span of the job. Secondly it is important to observe what kind of conditions the cabinets have to face in the kitchen. A ball-park estimate on how long a job can last is between 5 and 20 years, depending also on how good the cabinets are taken care of.

Does Cabinet Refacing Poway Improve the Cabinet’s Structure?

A simple to this question would be yes, but some explaining is needed. Although https://thestylishcabinet.com/ cabinet refacing Poway is a primarily aesthetic job, in some cases the structure of the cabinet box must be strengthened. This is done usually after the doors and drawers of the cabinet have been removed in order to have easier access.

The structure is improved usually by using plywood. This is attached to the existing structure in order to create a solid mass capable of sustaining further physical stress. The plywood also acts as a base layer upon which the veneers adhere better. Plywood isn’t the only material used but it is the most used in these situations. Thus, a cabinet refacing Poway job can have an influence over the structural stability of the cabinet overall.

Are Refacing and Refinishing One And The Same?

People researching refacing companies often can get sidetracked and start looking for companies offering refinishing services. These evidently are not the same thing. People might confuse them because both processes deal with kitchen furniture and cabinets, but the two are fundamentally different.
In order to better understand what refinishing means one should take a look at its steps:

Degreasing
The first step of the process requires the surfaces that will be refinished to be degreased. Grease and oil can splatter over time and build up on various kitchen surfaces. In order to properly ted to the cabinets in the kitchen they have to be wiped clean, both of dust and of any greasy residue.

Sanding
This step allows the creation of a rougher surface in order for the finish to better adhere to it. It is a long and painstakingly process as every inch of every surface that is going to be refinished is sanded. Also, in order to create a proper surface the sander has to go all the way down to the wood.

Priming
This is done in order to create a base upon which several coats of finish can be easily and safely applied. The primer also acts as a sealing agent against any harmful substances from inside the wood and also helps fill up any minor imperfections the wood surface might have.

Coating
This step requires the pouring of finish coats on the surfaces that were prepped. Depending on the specifications of the project, there can be anywhere between 1 and 5 layers of coating. A hardening agent is added to the mix in order to offer it more resistance. Between coats there is subsequent sanding in order to create a better surface.