The solar charge controller uses Pulse Width Modulation (PWM) technology through which the battery charge current will be gradually reduced it gets closer to complete charged level. This type of topology allows the batteries to perform in a more uniform way.

Batteries can be charged with less stress which will enhance their life span. To maintain the battery life, it is significant to use a charge controller or voltage regulator which can block reverse current and prevent battery overcharge. By using this technology, the battery may remain in a fully charged state by continuously adjusting pulse width or float mode. The controller is loaded with various significant features and provides overload or short circuit protection of batteries through miniature circuit breaker (MCB). It is quite versatile to use for standalone or multiple parallel module applications to suit different power rating requirements.

Important specifications of Solar Charge Controller:

• Such kind of equipment comes with different capacity ranges such as 3 KW/5KW/24V/48V/120V or 240V.
• The device is designed in the form of modular construction for proffering easy installation or dismantling facility to the users.
• Efficiently packed in powder coated -corrosion proof sheet steel box
• Have built-in battery reverse current blocking diode
• Comprises of Built-in MCB for battery short circuit protection
• Comes with selector switch for automatic or manual operations
• Equipped with higher voltage charging facility for equalizing charge in manual mode
• Armed with LCD display on front panel to show the status or monitoring of low battery and high battery level.
• Comes with wall or base mountable arrangements
• Embedded with lighting surge protective devices
• Input and output terminal is mounted on the front side for delivering easy accessibility, faster replacement of module and less down time.
• Have operating ambient up to 520C.

Status monitoring LCD device is armed on the front side of Car Battery Inverter Charger to display:

• Solar charging current
• Solar charging voltage
• Solar charging power
• Cumulative energy output in KWH
• Instantaneous or monthly average wind power

Fundamental functions of solar charge controller:

Such kind of controller may prove useful for all kinds of power systems which charge batteries. Its main purpose is to keep your batteries properly fed and in good condition for the long-term usage. These charged controllers prevent battery swindle, prevent battery over discharge, manage set points vs. temperature & battery type, protect from electrical overload and display battery status and the flow of power.


If you are looking for DVR for CCTV Camera, then check http://seanelectromecco.com.ng/




Sean Electromec

16, End of Salvation Road, Itedo, Lekki 1, Lagos

Nigeria

+2348145393808

[email protected]