SVR Global is well known Electric Actuated Ball Valve manufacturer in USA. An electric actuated ball valve is the closed valve. It is used to control the flow of medium or gas through a rotating ball that is connected to the actuator. This valve has a very long lifespan and they provide reliable fixing for the whole life of the valve. An electric actuated ball valve is more dependable and long-lasting than any other valve. They can continue to work admirably even after many years of use and can close securely even after many years of inactivity. These features make them the optimum choice for shutdown and control applications in a variety of sectors. To reduce or increased the pressure and fluid flow in the system, it can also be set to quarter-turn or half-turn settings.
An electric actuated ball valve converts electricity into kinetic energy with the help of an actuator in a rotating motion. Electric actuators are also known as motorized valve actuators. It can control the opening and shut off the electric actuated ball valve. Remote control systems allow responding to commands, making them suitable for controlling systems that are very difficult to access in large regions.

Electric Actuated Ball Valve is used in industries like:
• Power industry
• Textile industry
• Mining industry
• Chemical industry
• Pulp and Paper industry

Advantages of Electric Actuated Ball Valve:
• Installation is straight-forward
• Any medium can handle this type of valve
• This valve has a very low failure rate
• This valve provides a leak proofing service

Description:
Body Material: Cast iron, Carbon steel, Cast steel (WCB, WCC, LCB, LCC, WC6, WC9), Stainless steel (CF8, CF8M, SS316, SS304).
Class: 150 to 2500
Pressure: PN10 to PN450
Size: ½” to 48”
Operation: Electric actuated ball valve
Ends: Buttweld, Socketweld, Flanged, Threaded

Electric actuator details-
• Torque – 3 – 9 nm
• Operating pressure- 8 Bar
• Voltage- 220, 230, 240, 380, 400, 440
• Frequency {50, 60 Hz}
• Port Connection-NPT1.4”
• Mounting Base-ISO5211
• Temperature--20°C - +80°C

Visit: https://svrglobal.net/products/electric-actuated-ball-valve/

Pneumatic Actuated Ball Valve manufacturer in USA
SVR Global is topmost reputed Pneumatic Actuated Ball Valve manufacturer in USA. Pneumatic actuated ball valve is driven by air pressure. In peumatic actuator the opersting power is generated by compressed air. These actuator are quick to react but not really suitable for high pressure environment due the gas compressibility. They are available in two types, one is in spring return and second in double acting configurations. Pneumatic ball valve is operated by pressurized gas or air. This valve regulates the flow of fluid or gas through a ball with bore.
Features of Pneumatic Actuated Ball Valve:
• Pneumatic Actuated Ball Valve gives greater flow, wider media compability.
• Compact modular design of actuator provides direct mounting on ball valve.
• Gives quick opening and closing and has long life in working cycle.
• Ball valve has both sides seal which is covered by internal ball and can give tight shut off after year of cycle operation.
• This valve has a body that excruded aluminum hard anodized for corossion protection and wear resistance.

Pneumatic Actuated Ball Valve is used in industries like:
• Textile Industry
• Water Industry
• Construction Industry
• Electric Power Industry
Advantages of Pneumatic Actuated Ball Valve:
• Pneumatic Ball Valve has smallest fluid resistance in compared to other valves.
• This valve seal has good sealing performance.
• Trusht bearing of the valve reduce the friction of valve stem this results in valve stem operates smoothlu and flexibly for a long time.
• If the spring is set between the body and valve stem then the valve body exports generated static electricity.

Description:
Body Material: Cast steel (WCB, WCC, WC6, LCC, LCB), Stainless steel (SS304, SS316), Carbon steel(CF8, CF8M),
Class: 150 to 2500
Pressure: PN10 to PN450
Size: ½” to 4”
End: Flanged, Buttweld, Socketweld, Threaded
Operation: Pneumatic actuated
Pneumatic Actuator details-
• Torque – 3 – 9000 nm
• Operating pressure- 8 Bar
• Port Connection-NPT1.4”
• Mounting Base-ISO5211
• Temperature--20°C - +80°C

Visit: https://svrglobal.net/products/pneumatic-actuated-ball-valve/