Smart Curtain Motor Exporter Introduces The Installation Details Of Electric Curtains


Posted May 18, 2021 by wistarmotor

Smart Curtain Motor Exporter introduces how to install electric curtains:
 
Smart Curtain Motor Exporter introduces how to install electric curtains:

1. Before installing the electric curtain, you must install a track, you need to measure the fixed hole position and the total length of the track. If the track is arc-shaped, then you must use an additional measurement method. After the measurement is completed, you can install it on the wall. Draw a line on the top and set the installation position for the track.

2. After the positioning is completed, you can install the hoisting clip to the motor. The clip is installed with screws. First, rotate the clip 90° to connect it to the track normally, and then use the self-tapping screw to connect the clip and the top plate to each other.

3. Next is the connection of the motor. After connecting the wires according to the instructions, the motor and the track can be connected to each other. The motor has a specially configured transmission box. One end is connected to the motor is the main transmission box, and the other end is the auxiliary transmission. The installation method is to put the motor into the main transmission box at 90°, rotate 90° clockwise, and then push the card to the limit position of the transmission box, and the connection can be completed after it is automatically locked.

4. Adjust the operation of the motor, and the method of adjustment should be in accordance with the manufacturer's manual of the electric curtain.

Through the above introduction,Motorized Shades Blinds Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.wistarmotor.com/
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By wistarmotor
Country China
Categories Accounting , Affiliate Program , Architecture
Last Updated May 18, 2021