Use place
China 200W Led Flood Light Factory's （https://www.xiangruilight.com/product/flood-light-mars-series/high-power-200w-outdoor-slim-led-floodlight-ip65-mars-series.html） explosion-proof clean fluorescent lamps are generally used in purification (dust-free) workshops in electronics, pharmaceuticals, food and other industries, as well as purification laboratories, operating rooms, and dispensing rooms in biochemical, scientific research, medical, and health units. It is also suitable for offices, supermarkets, shopping malls and other damp, high protection requirements or flammable and explosive dangerous places.
Generally, in a clean room, during the operation process, the level is determined according to the level of cleanliness in the air and according to the requirements. The cleanliness requirements in the dust-free aseptic workshop are also strict, just to reduce the dust in the workshop and indoors. The basis for controlling pollution and achieving aseptic and dust-free effects can be standardized and implemented by a standard, which is also a test for the production of pollution-sensitive parts. Under the premise of meeting the requirements of production, firstly, use the local air with low cleanliness level for purification, and then use the air purification in the local working area and comprehensive air purification.
Five characteristics of explosion-proof and clean fluorescent lamps in dust-free workshops
The high-intensity explosion-proof clean fluorescent lamp is equipped with an explosion-proof special explosion-proof electronic rectifier, which has short-circuit and open-circuit protection functions. It is equipped with a preventive circuit for the aging effect and leakage of the lamp, so that the lamp can work normally, and the power factor can be as high as 0.98. It has a wide voltage output, in the range of 170V to 250V.
2. The lamp is equipped with an explosion-proof travel switch, and is equipped with an opening and power failure interlock device.
3. Emergency devices can be installed according to user requirements.
4. Various installation methods, embedded and ceiling installation.
5. The transparent part of the lamp body is made of reinforced carbonate material, which has the characteristics of high strength, strong impact resistance, high temperature resistance and cold resistance.
China 400W Led Flood Light Factory （https://www.xiangruilight.com/product/flood-light-mars-series/high-power-400w-outdoor-slim-led-floodlight-ip65-mars-series.html） installation and maintenance
1. The sealing ring of the lead-in device should be reliably pressed and the cable clamped;
2. Before the lamp is put into use, the internal and external grounding must be firmly and reliably connected to the user's site grounding system;
3. When installing and maintaining the lamp, it is strictly forbidden to open it with power;
4. Check the sealing surface regularly, and replace it in time if it is found to be aging;