The device used by Gasoline Log Splitter ( https://www.cnsuperpower.com/product/log-splitter/ ) to slice wood is mainly its blade. It can be said that if the quality of the blade is not good, it will affect our production efficiency, and some are not the problem of the blade itself, but the subsequent long time Use, a variety of materials are used for cutting, then some of the materials may cause damage to the equipment, let's take a look at the materials that may wear the equipment blades with the editor.
1. Viscous materials are very harmful to the blades. When the equipment is running, it is difficult to control the speed. However, viscous materials are likely to be affected by temperature, so there are many inside the equipment. These materials will stick to the place, which will cause a lot of adverse effects on the equipment, and the damage to the blade is large, so we need to clean the internal blade of the equipment after use, to avoid long-term adsorption of this viscous substance to cause the equipment Rusty.
2. Generally speaking, different materials have different hardness. Gasoline Log Splitter has a greater impact on the blade when processing high hardness and high hardness, which may cause loss to a certain extent, so that the blade may become dull. , We need to sharpen the blade regularly.
3. The equipment is mainly used to process wood. Among the more common types of wood, materials such as paulownia are lighter in weight and lower in hardness. Naturally, the loss of equipment is smaller, but it is like pine. Wood, pearwood, mahogany and other types of wood have relatively high hardness, and the processing time will be longer, so the wear on the blade will be greater.
The above Log Splitter manufacturers ( https://www.cnsuperpower.com/ ) introduce the materials that may wear Gasoline Log Splitter blades. Sometimes we need to process the above materials when using them. Then we need to polish and maintain the blades after processing, so that we can try our best Reduce damage.