Through interviews and survey feedback, customers will more or less always encounter some difficult problems in the process of using Gasoline Log Splitter ( https://www.cnsuperpower.com/product/log-splitter/ ). Based on the principle of customer convenience and customer service, we will carry out some knowledge explanation activities about wood chip machine products from time to time, and discuss with you the problems that customers often encounter or are difficult to solve, and find solutions, hoping to give Customers bring help to better use the company's products. So, in this issue of the explanation activity, we will explain the issue of woodchip machines. Next, please take a look at the following article:
1. The wood chip machine should be placed steadily, and the installation direction should be determined according to the actual situation of the site and raw materials. Generally, the small-size models do not need to make a foundation, and the user can directly power on the test machine to use.
2. Before use, first check the circuit and oil circuit in accordance with the "Instruction Manual" to confirm whether the connection is safe. The tension of each chain, V-belt and transmission mechanism is generally adjusted when the equipment leaves the factory or adjusted on site by the factory installer , The user should always check in the future use process;
3. The blade is made of alloy steel. After a long time of use, if there is wear or change the angle, the fastening screw of the blade can be loosened, and the blade can be removed for grinding and adjustment. If the wear is excessive, it should be replaced with a new blade of the same specification;
4. cnsuperpower Log Splitter manufacturers ( https://www.cnsuperpower.com/ ) connect the switch box or switch cabinet to the 380V three-phase power supply when connecting to the power supply. First, check whether there are debris and branches around the equipment that affect the operation and operation. After the power is turned on, first determine the rotation direction of the feeding roller to make the equipment Run dry for about 5 minutes, and pay attention to listening and observing whether the equipment is abnormal.