In this season, an effective Rapid Splitter ( https://www.cnsuperpower.com/product/log-splitter/ ) is very necessary. Here, I will introduce to you the use process of the high-pressure spray grass cutter:



1. The hay cutter should be placed or fixed on a solid and level foundation, and should remain stable during operation without major vibration.



2. Before starting the grass cutter, check all parts of the machine. Use your hand to move the knife shaft of the hay cutter to check whether it rotates flexibly, whether the cutter head has cracks, and whether the fasteners are loose. If hidden dangers are found, they should be eliminated in time.



3. Before operation, let the lawn mower idling for a period of time to observe whether it is running smoothly and whether there is any abnormal noise, and then it can be put into use after confirming it is normal.



4. Feeding should be even. If the speed of the cutter shaft decreases due to excessive feed, the machine should be shut down for cleaning.



5. Before processing the feed, the sundries in the feed should be removed, and hard objects such as iron and stones should be strictly prevented from being fed.



6. In case of grass blockage during operation, immediately release the clutch and stop to eliminate the fault. Do not open the protective cover when the machine is running.



7. Stop feeding before the end of the operation. After all the materials in the machine are discharged, loosen the clutch, cut off the power supply, and remove the impurities in the machine.



The utility model is mainly used for the crushing of raw materials in industries such as papermaking, pulping, and straw power generation. It can effectively save labor, simple operation, automatic feeding, good separation effect, and convenient soaking and cooking. It can be adjusted automatically according to different construction users and specific processing requirements. It can crush almost all straws such as wheat straw, cotton stalks, reeds and wood chips. In the lubrication process, how to effectively lubricate the Log Splitter ( https://www.cnsuperpower.com/) depends on the motor bearings, roller bearings, belt roller bearings, reducers, knife roller bearings, etc. High temperature grease, heavy-duty industrial gear oil and multi-functional grease can be used. lubricating.