China Corrugated Plastic Sign Factory introduces the maintenance method of PP hollow board turnover box:

1. Send the PP hollow board turnover box to be cleaned into the container cleaning room, then dip the rag into the cleaning liquid to clean the door handle, corner and bottom edge of the hollow board box to ensure clean and tidy, No stains.

2. Dip the rag into the cleaning solution, and clean the part of the plan view of the hollow box in the order from the inside to the outside and from the top to the bottom. It should be clean and free of stains.

3. Clean the hollow crate three times with tap water, infiltrate the turnover box into the water, immerse it about 3 cm up and down, then wipe it with a rag, and finally place it in the container cleaning room, which is naturally dry.

4. Generally, the wiping method is used to carry out disinfection and sterilization, and disinfectant is applied.

5. After the PP hollow board turnover box is disinfected and sterilized, place the container in the cleaning room, and the development is naturally dry, and the date and validity period of the disinfection and sterilization must be filled in.

Through the above introduction, China Corrugated Plastic Dividers Factory hopes that you can simply refer to the content of this article in future use.

https://www.yfcorrugatedplastic.com/