Knowledge about bathroom faucet maintenance.

1. Please have experienced and qualified professionals to install. When installing, the faucet should try not to hit hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating. If your faucet is used in a newly built house, because the water supply pipe network is newly paved, there will definitely be impurities such as sand in the water. Before installation, pay attention to removing the debris in the pipe. Discharge the water for a long time until the water quality becomes clear before installing the faucet.

2. Do not use excessive force to cause artificial damage when opening and using, just turn it gently. Even the traditional faucet does not need to be screwed with great effort.

3. The surface of the faucet should be wiped clean after normal use. Do not use the faucet handle as a handrail to support or use.

4. When the water pressure is not less than 0.02mpa, after a period of use, if the water output is found to decrease, or even the water heater is turned off, cut off the flow of cold and hot water, and use a wrench to gently unscrew the water nozzle at the water outlet of the faucet The screen cover, after cleaning the impurities, carefully install it, and it will generally recover as before.

5. The metal hose of the shower head of the bathtub faucet should be kept in a natural stretched state, and do not coil it on the faucet when not in use. At the same time, when in use or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.

After reading the introduction of the editor above, I believe that you should know the bathroom faucet brand and bathroom faucet maintenance friends. I hope this article can help you buy.

If you want to buy high-quality bathroom faucets, please feel free to contact us.

https://www.yusongroup.com/product/bathroom/faucets/