The gearbox system includes gears, drive shafts, bearings and box structures. Among them, the box structure plays a supporting and sealing role in the whole system, and the probability of failure is very low. Therefore, in the gearbox, the failure mainly occurs in the gears, transmission shafts and bearings. According to statistics, gear, shaft and rolling bearing failures account for more than 90% of gearbox failures.
In the fault diagnosis of the gearbox, it is generally only necessary to give whether there is a fault and the location of the fault. According to the characteristics of the vibration signal, the common typical fault forms are:
1. Tooth profile error
Tooth profile error means that the gear profile deviates from the ideal tooth profile, including manufacturing errors, installation errors and errors after service. This mainly refers to the tooth profile error generated after the gear is put into use, including plastic deformation of the tooth surface, uneven surface wear and surface fatigue, etc. Broken teeth also cause tooth profile errors, but because the characteristics of their vibration signals are significantly different from these tooth profile errors, they are listed as a separate fault form to facilitate fault diagnosis.
2.Gears wear evenly
Gear uniform wear mainly refers to the phenomenon of material friction damage in the meshing process after the gear is put into use, mainly including uniform wear of abrasive particles and uniform wear of corrosion. When the gear teeth are uniformly worn, there will be no serious tooth profile error, and the characteristics of the vibration signal are also very different, so it is not attributed to the tooth profile error.
3.Axis misalignment
Shaft misalignment mainly refers to the fact that the shafts at both ends of the coupling are parallel but misaligned due to problems in the design, manufacture, installation or use process, causing the gears on the shaft to produce distributed tooth profile errors. The difference between the vibration signal and the tooth profile error of a single gear is that when the shaft is misaligned, the gears on all shafts will produce tooth profile errors and cause signal modulation.
4. Broken teeth
Broken teeth is a serious fault of gears, mainly in two forms: fatigue broken teeth and overloaded teeth, most of which are fatigue broken teeth. When the tooth is broken, the vibration signal has a large impact energy, which is different from the tooth profile error and the uniform wear of the gear.
5. Cabinet resonance
Box resonance is a resonance phenomenon caused by the excitation of the natural frequency of the gearbox box by the impact energy. The resonance of the box body produces a large amount of shock vibration energy, which is a very serious fault and is generally caused by the external excitation of the box body.
6.Axis light bending
The gearbox center shaft also frequently fails. When the shaft is slightly bent, it can also cause tooth profile errors on the gears on that shaft. Unlike the single gear profile error fault, when the shaft is bent, all gears on the shaft will have a large profile error.
7. Axes are severely bent
Severely bent shafts are a more serious form of failure in gearboxes. When the shaft is severely bent, a large impact energy will be generated, resulting in serious consequences, and its vibration signal is also different from mild bending.
8. Axis unbalance
Shaft imbalance is a typical failure of a shaft in a gearbox. The so-called unbalance refers to the unbalanced vibration of the shaft due to the existence of eccentricity. This eccentricity can be caused by the deformation after manufacturing, installation and use. When the shaft is unbalanced, the tooth profile error will also be caused in the gear transmission, but this kind of fault is obviously different from the simple tooth profile error.
9. Axial play
Axial play mainly occurs when helical gears are used. When there are two helical gears engaged in meshing at the same time on the same shaft, and there is no good positioning and locking device in the axial direction, axial play sometimes occurs. phenomenon, which is mainly caused by the unbalanced axial force. Axial play will seriously affect the accuracy and stability of gear transmission, and may also cause impact wear on the end face of the gear teeth, which is a serious fault.
10. Bearing fatigue spalling and pitting
Typical failures of rolling bearings in gearboxes are fatigue spalling and pitting of the inner and outer rings and rolling elements. When the shaft rotates, the inner and outer rings and the rolling elements will have mechanical shocks during the contact process, resulting in a force with a large fluctuation range called shock pulse. When the rolling bearing in the gearbox fails, its energy is higher than the vibration energy generated by the gear. much smaller, and thus one of the difficulties of diagnosis.

Wangchi is one of the most famous manufacturers of engine gears and camshafts in China, and is also a famous trader of engine gears and camshafts around the world. The company enjoys a high reputation in the international market.

Founded in 2008, Wangchi specialized in the manufacturing of engine gears and camshafts, and has obtained reputation in the motorcycle industry in China after 14 years of operation.

In 2020, Wangchi started to develop gearboxes for construction machinery. As a new player in the transmission industry, Wangchi aims to break down technical barriers and build its name with advanced technologies.

Wangchi is always focusing on innovation and spending a lot in research and development every year. Its gearbox series are much smaller and lighter than the equivalent standard transmissions in the global market.

With outstanding R&D capabilities, Wangchi is able to offer integrated solutions to clients in the fields of mobility.

Wangchi, a dynamic innovator, is shaping the future of transmission system.

For more information, please contact:
No. 10 Factory, Huxiao Village, Nanquan Street, Banan Disctrict, Chongqing, China

Telephone. (+86) 17353225540. Email: [email protected]
Website: https://www.wangchigear.com/en-US/