Cosmetic Pump Factory Introduces The Structure Of High-pressure Water Mist Nozzle


Posted December 13, 2021 by jiemingsprayyuyao

Cosmetic Pump Factory introduces the structure and principle of high-pressure water mist nozzle;
 
Cosmetic Pump Factory introduces the structure and principle of high-pressure water mist nozzle;

The water mist nozzle structure can spray fine atomization effect. The spray angle of the small water mist nozzle is 45-90 degrees, and the diameter of the atomized particles is 10-50 μm. The water mist nozzle is embedded with a stainless steel nozzle core and a stainless steel guide vane, and includes an anti-drip device. When spraying, the liquid can flow at a high speed under a water pressure of 20 kg to 120 kg, forming a centrifugal vortex in the guide vane, and spraying a tiny hollow mist from the nozzle hole.

The water mist nozzle structure is a way to pressurize the liquid to a certain pressure, and then spray it out after being atomized by a high-pressure fine water mist nozzle that can withstand high pressure. The main material of the high-pressure water mist nozzle is 316 stainless steel, which can withstand relatively high pressure. At the same time, the high-pressure fine water mist nozzle has good corrosion resistance and acid resistance, and has a long service life. The high-pressure fine water mist nozzle can reach professional-grade water mist through pressurization, and has a long service life:

1. High-pressure fine particles use a specially processed swirl structure to atomize water into fine particles under high pressure. Generally, the average particle size of the water mist is less than 100 microns, the specific surface area and distribution density are high, and the vaporization cooling effect and the oxygen suffocation effect are stronger.

2. The high-pressure water mist nozzle fire extinguishing system uses easily available and cheap water as the fire extinguishing medium, which is environmentally friendly, non-toxic, and requires less water consumption, and has little impact on the water damage of the protected object. The high-pressure water mist nozzle adopts a swirl nozzle structure, which has a stronger cooling effect and an oxygen-proof suffocation effect;

The water mist nozzle can spray atomized particles with an average particle size of 10-50um. Water mist nozzle fire extinguishing is a high-tech patented technology that uses water droplets to atomize fire extinguishing. The small atomized particles of the water mist nozzle can quickly vaporize after a fire, which can absorb a large amount of heat and quickly reduce the temperature of the combustion surface. At the same time, the combustion area is surrounded and covered as a whole, so that the combustion is suffocated due to lack of oxygen. The fire-extinguishing principle of high-pressure water mist nozzles completely surrounds and covers the combustion area, so that the combustion suffocates due to lack of oxygen. The high-pressure water mist nozzle can atomize liquid into water mist and has a long service life.

Through the above introduction, Mini Trigger Sprayer Suppliers hopes that you can simply refer to the content of this article in future use.

https://www.jiemingspray.com/
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By jiemingsprayyuyao
Country China
Categories Accounting , Affiliate Program , Architecture
Tags cosmetic pump , mini trigger sprayer
Last Updated December 13, 2021