Using a medical oven improves the drying efficiency of the equipment, but while enjoying the convenience brought by the oven, the Non-medical Disposable Mask Suppliers introduce should pay attention to the following points when using the oven.

1. When powered on, do not touch the electrical parts of the chassis with your hands or wipe with a damp cloth and rinse with water.

2. Do not place too many items at one time, and do not overcrowd. You must leave a space for natural convection of air, so that moist air can escape quickly on the top of the wind, otherwise it will affect the drying effect.

3. The trays on which the instruments are placed must be in mesh format, and the ventilated mesh baskets can make the lower layer have hot air circulation. If the tray of the instrument is sealed, it will cause the reflection of hot air, which will affect the normal drying of the instruments in the lower row.

4. When placing equipment items, do not exceed the bearing weight of the drying cabinet to prevent damage to the equipment.

5. After drying, there will be hot air flowing out of the door, so do not open the door in a hurry to prevent the hot air from burning the face. Wear thermally insulated gloves when placing and taking out items to prevent direct contact with the interior of the studio.

6. After each use, the power supply should be cut off, and the inside and outside of the box should be kept clean.

Through the above introduction, Protective Mask (FFP2 NR) Suppliers hopes that you can simply refer to the content of this article in future use.

https://www.jingeao.com/