Aluminum Lamp Housing Suppliers introduces the matters needing attention in the process of using die-cast linear lamp housing:

1. If there are multiple core-pulling positions, we should release the two sides, but do not let go of the lower core-pulling, which will cause problems with the core-pulling during the finalizing process.

2. The pressure of the die-casting machine should be considered, and the pressure should be controlled so as not to damage the mold and cause unnecessary damage to the production process.

3. In the process of die-casting of the linear lamp shell, the suitability of aluminum alloy and die-casting needs to be controlled, the main melting time and die-casting time and temperature are required, and more importantly, the effect of process parameters on the quality of castings.

4. Considering the thickness of the die-casting wall of the linear lamp housing, too thick thickness will make it difficult to fill.

5. During the die-casting process of the linear lamp shell, we need to consider the complex structure of the mold and do not easily pull out multiple cores to avoid damage to the crafts.

Through the above introduction, China 100w Street Light Housing Factory hopes that you can simply refer to the content of this article in future use.

https://www.cnledstreetlight.com/