Has everyone encountered Flat Screen Printer ( https://www.hotairstenter.com/product/flat-screen-printing-machine.html ) plugging? Flat Screen Printer plugging is a very annoying thing, so why does the printer plug?


There are two reasons for the formation of Flat Screen Printer "plugs":

First, because the print head is not tightly sealed or placed for a long time after normal printing, the water evaporates excessively, causing the ink particles to dry up on the fine print head tip, making the ink unable to eject normally;

Second, because different inks are mixed with each other, a chemical reaction occurs, which usually manifests as faults such as broken lines, missing colors, blurred writing, and even failure to print normally.
From the first reason, it is mainly due to the problem of the ink cartridge design. We know that the water of the printing ink evaporates very quickly. In this way, when the printing is normal, the seal is not tight, and the ink particles will be on the tip of the print head. Sedimentation caused the ink to not eject normally when used next time. The two types of ink cartridge designs currently used in the market will cause this type of plugging, because there is no good way to deal with the ink particles left on the print head after normal printing.

The second reason is that Stenter ( https://www.hotairstenter.com/product/hot-air-stenter.html ) is mainly due to the problem of compatible consumables. After the consumables are used, many users will use cheaper compatible consumables or use filling methods to fill the ink, which causes the new ink to mix with the original remaining residue. A chemical reaction may occur, causing the print head to not work properly. Therefore, when purchasing compatible inks, you must purchase licheng regular brand inks, and clean the piping system before filling new inks.