But just like all other parts of your home, your molding and trim also need to be maintained so that they can last for a long time. Maintenance doesn’t have to be difficult. Here are the things that you can do to make sure that your exterior molding and trim do not succumb to wear and tear:

1.Find out what kind of material it is.

Don’t put anything on your moldings and trims without knowing what kind of material it is. Most older homes have wood trims but you can also find those that make use of natural stone trims. Once you know what material is used, you can find the right treatments and products to keep them in good
shape.

2.Pick a sealer that fits the material of your molding and trim in Vancouver.

For wood trims, you need to get a sealer to prevent moisture from seeping into the material. Wood is weak against moisture. It can rot and degrade when not treated.

Once a year, put a sealer on your trims. That will keep their moisture-proof. You can also put a treatment that will prevent termites from eating the wood. If you have termite problems in your home, this is essential.

You can also check the parts that need to be re-caulked. Over time, the caulk that attaches the trims to the wall will deteriorate, causing the trims to separate. Apply caulk as necessary.

3.Clean it to remove stains.

Try scrubbing out stains using a wood cleaner or a mild dishwashing soap. Scrub it with a soft-bristled brush. You can also use a wet cloth to wipe the edges of the molds and remove accumulated dust.

4.Try repainting it.

If you can’t get rid of the stains, try repainting it. Use the same paint color as the original. If your trims are not painted or they are left natural, try using a stain to bring the wood grain to life.

You can also switch to low-maintenance trims such as foam crown molding. You can get this from Patterson Whittaker Architectural Profiles. They are cheaper than wood and they can last longer without the need for constant and expensive maintenance.