Water pipes or hookahs are smoking devices that have become trendy nowadays in every corner of the world. However, to take a drag from a hookah is one thing but what about the process if you want to set up your small hookah Chicago for rental? In case you want a little bit of help with the matter, this bulletin will make sure you do it well.

Clean the Hookah:

Firstly, you should wash the hookah with water. You may use a soft brush to clean it well. You should disconnect all the parts of the hookah and wash each of them but not the hoses. You should wipe the other parts dry with a clean towel.

➢ You must clean the hookah after every session in the aforementioned way. Whenever you get to see residue on the vase or you are missing the right taste of smoke while smoking, what you need to do is clean it.
➢ You should use a thin and long brush while cleaning as it helps you to reach inside long parts of hookah.
You may buy this long brush in the store where you approach for buying hookah Chicago rental for a small party.

Pour Cold Water into the Vase:

The vase is the large container at the base. You need to fill it enough that it covers 2.5 cm or slightly more of the metal stem. Leave the rest of the space for the air as it will dilute the smoke. The air will also help in making it easy to draw it on the hose. But above is not the case for mini hookah delivery. For a mini hookah, you should cover 1.25 of the stems, and for the rest of the part, you should leave it for air.

➢ The metal tip is the stem. It is at the bottom of the central hookah shaft. You should slot the shaft of the vase. Now, you will get to see how far the stem is gone.
➢ Most smokers believe that water is unable to filter the nicotine and chemicals. You should avoid adding water in excess as it is not safe for your small hookah delivery for rental.

Insert the Shaft into the Glass Base:

You should lower the shaft into the base to let the stem enter the water. A rubber piece or silicone should be there so that it could fit the top of the base for making it airtight.

Connect the Hoses:

As it is the matter with the base, the holes must be fit airtight. You should recheck the level of water before connecting because the water level should not be very near to the hoses otherwise it can ruin your hoses.