Basic to get router set-up installed is to have a strong internet connection. So, before you opt for wavlink router setup, it is essential to connect a computer to the modem or gateway device provided by your Internet service provider (ISP). Once the connection is detected, the router installation process can be initiated.
Some of the requisites that must be fulfilled before installing the wavlink router setup include:

1. Gathering complete documentation which are available as a tutorial carrying information like router's default username and password, its wiring guide, etc.
2. As an additional assistance, many router manufacturing companies provide web dashboard or apps that can be access to smoothen the process of setup and subsequent running of a router. It simplifies the configuration using a smartphone app.
3. Also pay close attention to installing and extending antennas that are often packed separately in the router box. Extending the antennas prior setting up is an important tip to remember.

What are the steps involved in wavlink router setup?

Router setup process many seem easy but a miss here and there can definitely turn this quick task into hours of labour. So, here is a step by step guideline to install the router like a pro:

Step 1: Foremost step is to decide the location of your router. An ideal place for a wireless router is an open area or connecting the router to the broadband gateway provided by ISP which comes attached to a cable in an outside area.

Step 2: Link the router to a cable or for long range connection, use a CAT5e or CAT6 cable to sync with ISP gateway's Ethernet port. Also, users can install a mesh network along with a router. The Ethernet cable requires to be plugged into the router for wide-area network (WAN) or Internet port.

Step 3: Inspect the router's LED lights which will come to life if the internet is successfully connected.

Step 4: Verify if the connection is received by your device be it a smartphone or your laptop to ensure you have an active connection.

Step 5: Connect the gateway to router by switching off the gateway first if it is already plugged in and plugging the same into the router's WAN port. Wait for the connection to be active in a few minutes.

Step 6: Router's IP address is usually printed on its back which helps the users to create a unique username and password of their own.

Step 7: Updating the existing router's firmware also helps in fixing bugs or installing new security protection.

Step 8: Set up security by accessing security features like web filtering, firewall, and access controls to stay safe from malicious traffic.

Visit here: https://wifiwav-link.com