How to make Led High bay ( https://www.xiangruilight.com/product/ufo-led-high-bay-lights/ ) windproof design In some places with high level and large air volume, light poles are burnt down by wind every year. The lamps are often caused by wind power failure. Wind dust is an important reason, which causes the brightness of the lamps to be seriously attenuated. Therefore, we are at 0
Thank you for your attention to our products. Our company specializes in the production and sales of high-quality engineering lighting fixtures. Friends who have certain requirements for quality are welcome to contact our customer service to obtain product information and serve you in time.
　　
　　How to do windproof design for solar street lights

　　In some places with high level and large air volume, light poles are burnt down by wind every year. Lamps are often caused by wind power failure. Wind dust is an important reason, causing the brightness of the lamps to be seriously attenuated. Therefore, when we are in the 0x82e solar street light, it is not only beautiful and functional, but also 0x7d and dustproof lamps and poles. Only in this way can we ensure that street lights bring convenience to people in urban infrastructure, travel and life production, and street lights are safe to use.


　　（1）Lighting

As an important part of the street lamp, the quality and opening method of 0x7d are very important. The material must be aluminum, alloy is applied, and the thickness can meet the requirements. The lamp body does not allow cracks or holes. Each component has a good connection contact. This is the top priority for the buckle. The previous lamps were damaged because of the unreasonable buckle design, which caused a large number of lamps to be damaged after each wind. Therefore, if you want to use spring buckles on the lamp, it is best to install two. 0x7f is turned on and the upper part is directly connected, and important parts such as ballasts are fixed on the lamp body to prevent the parts from dropping and causing safety after the lamp cover is damaged. accident.


　　（2）Light pole

The height of the poles of the Led Flood Light Factory ( https://www.xiangruilight.com/ ) must be selected for the width of the road and the usage conditions. The wall thickness is more than 3.5mm, the inner and outer hot dip galvanized, the thickness of the zinc layer is electroplated more than 35μm, the thickness of the flange is more than 18mm, and welding between the flanges Strengthen the light pole ribs to ensure the strength of the bottom of the light pole. Since the last electro-galvanized light pole did not have unacceptable additional welding reinforcement, the bottom light pole was severely corroded, and the wind blown off has already occurred in the phenomenon of the light pole. Therefore, the wall thickness of the pole, the thickness of the electro-galvanized steel, and whether the welding reinforcement is an important or unimportant sign of the pole, otherwise it is used.