There are 28 discs on the Log Splitter ( https://www.cnsuperpower.com/ ) spindle. For every two discs, seven hammer heads are suspended by pins. There are a total of seventy hammer heads hung on the entire rotor. The two ends of the main shaft are supported on the rolling bearing seat. The motor directly drives the rotor to rotate through the elastic coupling. However, since its rotor can rotate in both forward and reverse directions, its main parts and components are arranged symmetrically, and the feed inlet of the comprehensive crusher must be placed above the center of the machine.

In order to prevent the hammer from bringing unbroken materials or non-broken objects to the other side of the rotor and causing accidents, the lower ends of the left and right side plates can be separated by a certain distance. There are no grate bars within this distance. An adjustable cage basket (or hard carbon basket) that can swing from side to side is installed at the lower end of the comprehensive crusher, and the unbroken materials fall into this basket. The operator regularly pulls the pull rod exposed outside the casing to discharge the unbroken materials accumulated in the cage.

After the Chipper Shredder ( https://www.cnsuperpower.com/product/chipper-shredder/ ) has been running for a period of time, the working side of the hammer has worn out, and the liner and grate on the side of the rotor have also worn out to a certain extent. At this time, the motor can be reversed and the rotor can be reversed. The unweared side of the hammer becomes the working surface, and the unweared grate and liner on the other side can be used. However, it is necessary to close the previously open hinged plate and open the previously closed hinged plate.