Normal Operation Of Gasoline Log Splitter


Posted February 1, 2021 by xuepaer

Before the Gasoline Log Splitter works, all parts must be inspected and adjusted according to the regulations, and can only be operated after meeting the requirements
 
Before the Gasoline Log Splitter ( https://www.cnsuperpower.com/product/log-splitter/ ) works, all parts must be inspected and adjusted according to the regulations, and can only be operated after meeting the requirements; the moving blade and the static blade should always maintain sharp edges, otherwise, they should be removed for polishing in time.

During the installation process, inject grease into the bearings on both sides of the main shaft and the bearings on both sides of the feed roller shaft. After each month of use, the bearings should be removed, cleaned and relubricated before installation and use.

Lubricate once a month after operation, and often add oil to other rotating parts for lubrication during use. In addition, always check whether the parts are damaged, severely worn and loose, especially working parts and rotating parts.

If damage, severe wear and looseness are found, they should be replaced, repaired and tightened in time to avoid major accidents; when the machine stops, the dust and dirt on the surface should be wiped off. If you park in the open air, you should cover the Gasoline Log Splitter with a poncho and analyze the maintenance points of the Gasoline Log Splitter to prevent the machine parts from rusting and affecting normal operation.

1. The tool of the Gasoline Log Splitter must be sprayed well. The sprayed paint is a good way to extend the service life. There is also thermal spraying technology, which uses gas and liquid fuel as the heat source to atomize, spray, and deposit on the surface of the pretreated workpiece through high-speed airflow to form a method of firmly attaching to the surface of the tool.

2. Be sure to do maintenance work before going to work. Newly installed tires are easy to loosen and must be checked frequently.

3. The maintenance of Log Splitter manufacturers ( https://www.cnsuperpower.com/ ) after work is also to improve wear resistance. After the Gasoline Log Splitter work is completed, the discarded forage must be processed to prevent the discarded forage from remaining in the Gasoline Log Splitter, which will affect the next normal operation, and may cause damage to the machine and affect the service life of the Gasoline Log Splitter .
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By xuepaer
Phone 0086 (0)573 8464 3695
Business Address 391 Huimin Road,Huimin Town, Jiashan City,Zhejiang Province, P.R. China
Country China
Categories Business
Last Updated February 1, 2021