Aluminum Lamp Housing Supplier introduces the method of installing indoor lighting:

1. When setting the installation plan, we must first notice that if we want to install the lamp successfully, we must check in advance whether its accessories are complete and whether there are any defects.

2. Know the place for each lamp to be installed according to its purpose. Chandeliers and ceiling lights should be installed in a large room, such as the living room, while wall lights and downlights should be installed in small rooms such as bedrooms and bathrooms so that the effect will be better.

3. You can choose a variety of lighting colors, whether it is bright or dark, as long as it meets your aesthetics and allows romance and fashion to fill the space, it is a good installation choice. The appearance of the lamps is also the same, allowing the designer to help you decide.

4. When installing electrical lighting fixtures, screws, hooks, and other fixtures should be used for tight fixation.

5. If the position of the lamp is less than 2.4 meters from the ground, the voltage used cannot be greater than 36 volts, and the surface of the lamp must be insulated.


Through the above introduction,High Lumen Street Light Housing Manufacturers hopes that you can simply refer to the content of this article in future use.


https://www.cnledstreetlight.com/